|
Fits: 2016-2024 2LT/2SS Camaro With BOSE Amplifier (Diagonal fins)
Kit Includes:
(1) 6G-BZT Bose Audio Output "T" Harness
(1) 6G-BZ-ANC Bose Active Noise Cancellation Disable Harness
Buy Both and Save.
Everything you need to add a sub to your Bose stereo and eliminate the dreaded feedback associated with the Active Noise Cancellation (ANC) feature.
The 6G-BZT "T" Harness
Provides 3-channel Stereo Output For Adding Additional Amplfiers ie a Subwoofer Amp.
Easy Plug and Play installation. Anyone can install this device and is done completely from the trunk in seconds
A very valuable tool if you intend to do any kind of wiring to the car's audio system. This will save you lots of time and hassle.
The 6G-BZ-ANC Active Noise Cancellation Defeat harness simply plugs inline at the X3 connector (connector closes to the rear of the car) and deactivates the microphones and thus will prevent the dreaded ANC feedback.
What is ANC?
Active Noise Cancellation aka ANC is present on 2SS Models with Bose Stereo and uses microphones hidden in the door panels of your Camaro to pick up in-cabin noise. The mics send this information to the amp, which in-turn sends offsetting signals out to all the speakers in the vehicle to help quiet the cabin. This is a great technological feature until an aftermarket subwoofer is installed in the vehicle. The microphones begin to pick up the extra bass tones from the new subwoofer and proceed to pump the loud offsetting tones thru all the speakers and sub(s), resulting in a vicious cycle of obnoxious sound. Hence, the dreaded feedback that will persist until the ANC system is defeated. Our defeat harness is the easiest way to disable the anc. It's simply plug and play and can easily be put back to stock at any time. There are no wires to cut or mics to locate, simply plug the harness in at the amp and your finished.
Note: New Camaros do Not provide 12v switched power in the trunk for switching on aftermarket amplifiers. Therefore no switched power is present on the harness. Also note that Bose systems have digital inputs from the radio to the amp, which cannot be interecepted for adding amplifiers. Therefore our harness borrows the signal 'after' the amp, which is a high power signal--hence no rca jacks.
Therefore, you will need to use an amp with signal sensing high level input capabilities OR a signal processor with signal sensing input to trigger on your amp. Also we have found that only the Front channels are strong enough to trigger on an amp.
Also note that 2LT BOSE equipped stereos incorporate and amplify exhaust tones into the cabin thru the speakers. Since our test car was not 2LT BOSE we are gathering more info on this topic to possible come out with a similar harness.
Our Audio "T" Harness Contains:
3 channel blunt cut leads approximately 13" long
Can be extended by user as needed.
Wire Color Function
gray wires right front channel solid is+ blk stripe is-
white wires left front channel solid is+ blk stripe is-
*green wires left rear channel solid is+ blk stripe is-
*(Green wires are not used on camaro but are present since they are needed for other vehicles.
Note: Please be sure your car has the BOSE Amp, which can be found under the spare tire cover in trunk. The BOSE Amp has Diagonal Fins. See Example Photo under the More Images Tab Above.
This Harness will NOT work on Non Bose Amps which have the Horizontal Fins (you need our 6G-NB-JBP)
If your car has No amp at all, then we have no harness for those non amp applications at present.
|
Email Us:
