-Fits All 2010-2015 Camaro Coupe with Boston Acoustics Factory Sound Systems
(if you have a Non Boston Stereo ie Base Stereo, this is NOT for you nor do we have anything)
-Plugs Directly into the Boston Amplifier In the Trunk - Easy!! Again BOSTON Stereo ONLY!
-Provides 4 channel RCA Pre-Amp Output Jacks to your Factory Boston System
Did we mention For Boston Acoustic Systems Only. There is no need to ask if this will work with your base stereo, Please see above.
-Perfect for adding a sub to your existing 9 speaker factory Boston Acoustic System
-Does NOT interfere with, replace, or alter the factory boston amp and speaker system in any way shape or form
-Allows anyone to self-install their subwoofer system in their car without taking it somewhere to be wired up
-Easy Plug and Play installation. Anyone can install this device and is done completely from the trunk
-Saves time and eliminates the guesswork of searching for the right wires in the amp harness to tap into.
-Works with All BA Head Units, Including MyLink
-Color of RCA Jacks may vary.
-Sold in over 11 Countries Worldwide. We have sold this harness in The US, Canada, Mexico, Germany, Russia, Israel, Australia, UK, Switzerland, Finland, and Sweden.
Do you own a 2010-2015 Camaro and are wanting to install an aftermarket sub and sub amp? If the answer is yes, then we have the perfect product for you. We have developed an extremely useful plug and play T-harness that will allow you to add RCA outputs to your factory Boston Acoustics sound system. To install the device, you simply unhook the lower connector on your factory amp (found in your trunk behind the carpet) and plug our special output in-line harness. The harness is designed to give you RCA outputs and a turn-on lead for sending signal and switched power to your aftermarket amp. The simple plug and play feature eliminates the hassle and guesswork of finding which wires to use for your signal and turn-on wires. No more degrading your factory harness by splicing or soldering into it. Don't waste hours trying to get signal to your amp. If you want to cut hours off your install time and make things easier on yourself, pick one of these up today. Please note that this harness provides signal and switched power only. We keep getting the misconception that this will 'run your new amp'. It will not do so by itself. You will still need to provide power and ground wires from your battery to your amp as well.
What's new with Version 3.0
Version 2.0 was a great improvement of our initial V1.0 design. With version 3.0 we have simplified the wire colors greatly, which makes working with the harness much easier, should it be necessary. V3.0 uses eia standard wiring colors. This way if you need to trim off the rca's and hard wire your harness to your device, you can quickly and easily decipher the wiring. A complete wiring key is below for your convenience.
-Installs in seconds. Plugs into BA Amp in Trunk
Watch the video below
Just got my T-Harness from subthump and its the best
cut my 2 hours of pain to 20 min and sub is working ;-)
-Note#1: This unit provides signal and remote turn on lead. It will not "power your amp".
You still need to run power and ground cables from your battery to your amplifier
-Note#2 Some Amplifiers may require additional line conditioning such as a ground loop isolator, sold separately
-We Highly recommend picking up our Pre-Amp Filter (SNI-1) in the related products below to go along with your harness. Plug this device into the harness and plug your rca cables into it. The SNI-1 will eliminate the dc voltage in the line, which makes the signal much safer for all amps and eliminates the turn off thump.
Wire Color Function
white w/ orange stripe 12v amp turn-on
purple wires right rear channel solid is+ blk stripe is-
green wires left rear channel solid is+ blk stripe is-
gray wires right front channel solid is+ blk stripe is-
white wires left front channel solid is+ blk stripe is-