Top » Catalog » Car Audio Products » Installation Accessories » Vehicle Integration Adapters » item: 5G-X3 RCA

Subthump Exclusive 2010-2015 Camaro Plug & Play RCA Output T-Harness For Factory Boston Amp V4.0 *Best Seller*

 [item: 5G-X3 RCA]
 $69.00 
Availability: In Stock

Description

Subthump Exclusive 2010-2015 Camaro Plug & Play RCA Output T-Harness For Factory Boston Amp V4.0  *Best Seller*

-Fits All 2010-2015 Camaro Coupe with Boston Acoustics Factory Sound Systems

(if you have a Non Boston Stereo ie Base Stereo, this is NOT for you nor do we have anything)

-Plugs Directly into the Boston Amplifier In the Trunk - Easy!!  Again BOSTON Stereo ONLY!

-Provides 4 channel RCA Pre-Amp Output Jacks to your Factory Boston System
Did we mention For Boston Acoustic Systems Only.  There is no need to ask if this will work with your base (non boston) stereo, Please see above.


-Perfect for adding a sub to your existing 9 speaker factory Boston Acoustic System


-Does NOT interfere with, replace, or alter the factory boston amp and speaker system in any way shape or form.  All current speakers will function just like they do now. 


-Allows anyone to self-install their subwoofer system in their car without taking it somewhere to be wired up


-Easy Plug and Play installation.  Anyone can install this device and is done completely from the trunk


-Saves time and eliminates the guesswork of searching for the right wires in the amp harness to tap into. 


-Works with All BA Head Units, Including MyLink

-Color of RCA Jacks may vary.


-Sold in over 11 Countries Worldwide.  We have sold this harness in The US, Canada, Mexico, Germany, Russia, Israel, Australia, UK, Switzerland, Finland, and Sweden. 

 

Do you own a 2010-2015 Camaro and are wanting to install an aftermarket sub and sub amp?  If the answer is yes, then we have the perfect product for you.  We have developed an extremely useful plug and play T-harness that will allow you to add RCA outputs to your factory Boston Acoustics sound system.  To install the device, you simply unhook the lower connector on your factory amp (found in your trunk behind the carpet) and plug our special output in-line harness.  The harness is designed to give you RCA outputs and a turn-on lead for sending signal and switched power to your aftermarket amp.  The simple plug and play feature eliminates the hassle and guesswork of finding which wires to use for your signal and turn-on wires.  No more degrading your factory harness by splicing or soldering into it.  Don't waste hours trying to get signal to your amp.  If you want to cut hours off your install time and make things easier on yourself, pick one of these up today.  Please note that this harness provides signal and switched power only.  We keep getting the misconception that this will 'run your new amp'.  It will not do so by itself.  You will still need to provide power and ground wires from your battery to your amp as well.


What's new with Version 4.0

Version 2.0 was a great improvement of our initial V1.0 design.  On version 3.0 we simplified the wire colors greatly, which makes working with the harness much easier, should it be necessary.  With V3.0 we began using eia standard wiring colors.  This way if you need to trim off the rca's and hard wire your harness to your device, you can quickly and easily decipher the wiring.  A complete wiring key is below for your convenience. V4.0 is the final version.  We have taken this harness as far as it will go and you have witness a great transformation.  V4.0 is the first version with our new manufacturer and with that, comes the capabilities for the rca jacks to be installed at the manufacturer instead of outsourced after the fact.  Not only that but the jacks are color coded like the wiring for a seamless and professional look. 

 

-Our harness Installs in seconds.  Plugs into BA Amp in Trunk (not behind the radio as some might think) so it is so much simpler than you can imagine.


Watch the video below

http://www.youtube.com/watch?v=WKWZjUnoZvw

 

Customer Comments

Just got my T-Harness from subthump and its the best
cut my 2 hours of pain to 20 min and sub is working ;-)


-Note#1: This unit provides signal and remote turn on lead.  It will not "power your amp". 
You still need to run power and ground cables from your battery to your amplifier
-Note#2 Some Amplifiers may require additional line conditioning such as a ground loop isolator, sold separately
-We Highly recommend picking up of our Pre-Amp Filters (SNI-1) in the related products below to go along with your harness.  Add one to your order as it makes a nice combination with the harness, plus it's great insurance as it protects amps from the dreaded DC voltage in the Camaro's audio signal.  Plug this device into the harness and plug your rca cables into it.  The SNI-1 will eliminate the dc voltage in the line, which makes the signal much safer for all amps and often times eliminates the turn off thump.


Wire Color
                            Function
white w/ orange stripe      12v amp turn-on
purple wires                      right rear channel  solid is+  blk stripe is-
green wires                       left rear channel    solid is+  blk stripe is-
gray wires                         right front channel solid is+  blk stripe is-
white wires                       left front channel   solid is+  blk stripe is-
-------------------------------------------------------------------





 

 

 

 

Mfg Info

Manufacturer Info
Other products

Reviews

by Evan Sailer Date Added: Thursday 23 January, 2014
extremely easy to use. just plug it in and you're ready to go. works really well

Rating: 5 of 5 Stars [5 of 5 Stars]
by Dustin Sanders Date Added: Monday 09 November, 2015
Love this harness! I can't stand ripping and cutting up my car to run extra wire. Direct fit to the existing amp, and no headaches. If only every install was this easy. Awesome product!!..

Rating: 5 of 5 Stars [5 of 5 Stars]
by Mitch Michaels Date Added: Saturday 10 December, 2016
Very easy to use! It makes installing a sub and amp much simpler and cleaner.

Rating: 5 of 5 Stars [5 of 5 Stars]
by David Borell Date Added: Monday 27 March, 2017
Works perfectly and completely plug-and-play. With the remote-on wire for an amp, this made wiring in an amp for a subwoofer quick and painless. Just send your amp power and ground and you're done...

Rating: 5 of 5 Stars [5 of 5 Stars]

Extra Info

Comments
Current Reviews: 4Read Reviews
Write a review on this product!


Extra Info
This product was added to our catalog on Tuesday 30 March, 2010.
Notify me of updates to Subthump Exclusive 2010-2015 Camaro Plug & Play RCA Output T-Harness For Factory Boston Amp V4.0 *Best Seller*
Tell someone you know about this product.


Availability: In Stock
 Add to Wish List 
 $69.00  Quantity:        
We Also Recommend :
2010-2015 Camaro LS/LT/SS/ZL1 Large Drivers Side Stealth Enclosure    *Best Seller*
2010-2015 Camaro LS/LT/SS/ZL1 Large Drivers Side Stealth Enclosure *Best Seller*
 $129.00 
 Buy Now 
2010-2015 Camaro 10" Drop-In Drivers Side Stealth Enclosure
2010-2015 Camaro 10" Drop-In Drivers Side Stealth Enclosure
 $119.00 
 Buy Now 
2010-2011 Camaro Trunk Rear Fire Dual Premium Subwoofer Box  *Best Seller*
2010-2011 Camaro Trunk Rear Fire Dual Premium Subwoofer Box *Best Seller*
 $129.00 
 Buy Now 
2010-2015 Camaro Factory Fit Amp Mount
2010-2015 Camaro Factory Fit Amp Mount
 $19.00 
 Buy Now 
Customers who bought this product also purchased