Fits 2015-2018 Chevy Colorado & GMC Canyon Crew Cab Trucks
Approx. Empty Weight: 28 lbs
Installs under rear seat
Plastic cover and support bar must be removed for box to fit
Box is held in securely by seat
No modifications to truck are required
Speaker fires down with
1-1/2" of box to floor clearance
Fits one 8" or 10" shallow subs
Will not fit oversize 10" shallow
subs like 10tw3
Cutout Size=9-1/8" for 10"
Cutout Size for=7-1/8" for 8"
Mounting Depth: 3-1/2"
with restrictions-see below
Amp shelf: 11" x 15"
Volume: .6 cu.ft
Carpet shown: Charcoal Gray
Subwoofers Sold Separately
This box is very similar to our Dual Downfire box.
You can check out that video here
If you own a new 2015 Colorado or Canyon pickup, you already know that there isn't much room left over for subs. The space under the rear seat is very restrictive and doesn't allow for much in the way of subs to be installed under it. But we managed to design a box to fit under the seat that will hold a 10" sub and have space left over to mount your amp on. This makes for an excellent install that is both clean and nice-looking. Like our dual box, this box also requires you to remove the plastic shield and support bar under the seat. But don't worry because the box is the perfect height and the front of the seat rests firmly on the box and locks into place like normal. Because of this, the box is actually held in place nicely by the seat and doesn't move a bit. You will love how this box fits and sound in your truck.
Please note that not every shallow sub is going to fit in this box. We will try to list some of the ones that will work. Remember, we are pushing the envelope here and the space is extremely tight. The subs we used are the Rockford R2 and they work very well. We will not take returns on this box if 'your' sub doesn't fit. This is a specialty application, please choose a sub from the list or find one that does fit. 8" subs will be more forgiving, so go that route if you want to play it safe.
Known subs to fit:
Rockford P3 Shallow
A note about Pioneers: Pioneers traditionally have all different cutiout sizes and frame sizes on their shallow subs. In other words their different models are all over the place in this regard. If you plan to use pioneers make sure you select a model with a cutout that will fit our standard hole size of (9-1/8") but also fit's the depth requirement of the box. This is why we really do not recommend pioneers. The others on the list are far better and will fit the hole requirement. Please be aware that if we have to modify our design for a larger hole size, that this will require building the box from scratch and therefore a customization fee will be applied.