1.3dB Gain (20 to 20,000Hz)
Adapts Floating Ground Output to Common Ground
Internally Shielded to Avoid Noise Transferrence
Ground Loop Isolation Noise Reduction
Simple RCA Connection
1 Needed Per Channel
Use this in conjunction with our 5G-X3RCA T-harness for 2010+Camaro. We have found that some amps require this or similar device to eliminate the DC voltage that is present in the Camaros audio signal in order to operate properly. Many amps do not require this additional step. There is no way to predict in advance which amps which amps are compatible with the Camaros audio signal and which ones are not. Most Kicker and JL amps for instance work great without the need for this device. If you have a Kicker or JL amp and your system is working great, then there is no need to worry and no need for this device. But we have come across a few amps recently (orion and a few others) that do not like the dc voltage in the Camaros outupt signal and require it to be removed-pre-amp. The SNI-1 is perfect because it plugs right into the RCAs on the harness. If you are unsure whether your amp will need this or not, a safe bet is to pick one up and use it. If you want to proceed without the ground loop isolator, please note that if your turn on your system and it works, then you have no worries and no need for this device. But if your amps protect light comes on or you hear any strange squals in your system, then you will likely need to get one of these for your amp (easy fix). Order both the Camaro harness and SNI-1 and save on shipping.