|
Fits: 01-06 and 07 Classic GM Heavy Duty Crew Cabs
Approx. Empty
Weight: 27 lbs
MDF Construction
Installs under the rear seat
Must swing jack out of
the way
No other modifications required
Does not affect rear seat
latching
Forward folding function slightly affected
Fits 8" round or square and 10" round
subs
Mounting Depth:
6-1/8"
Volume: .55 cu.ft per chamber
Sealed Box, separated
chambers
Finish:
Carpet
Terminals: Installed
Subwoofers Sold
Separately
We have
been asked over and over again if we had anything for the GM full size crew cab
HD trucks. So we went to work on a radical new sub box design for this
truck. The result: a dowfire box that fits neatly under the rear seat and
packs one heck of a wallup. This box hits so hard you will not believe
it. Hands down, this is easiest and simplest way to get big sound in your
HD crew.
As you can see from the photos our box is designed to fit
both the the bench seat rear and
the 60/40 split rear seat. You've probably noticed that there aren't a lot
of boxes out there for this particular truck. And nobody does one for the
newer style split seats without major modifications required to the truck.
Many of the boxes out there are quite generic-looking or don't fit too
good. Not to mention that when they say you must remove this bracket or
that bracket, they actually mean that you have to "cut" the bracket out of the
truck. Not with our box. Our box requires no modifications to the truck
whatsoever. The box fits great and sounds even better. It molds around
every part of the under seat area, including all the tricky seat bracing and
supports for an authentic-custom look. You don't even have to take out the
jack. One of our customers suggested that you can drill another hole in
the bass plate of the jack so it can simply be rotated out of the way and
re-positioned. Other than that, just drop the box into place and start.
thumpin'.
This is a two-chamber sealed box with .55 cu.ft. of air
space per chamber. It is meant for two 10s or two 8s only. There is no way
to fit 12s in this box so please do not ask. Two 10s were a challenge and
pound quite nicely. Standard mounting depth is now 6-1/8", and is even
expandable to 6-5/8" if you add a 1/2 spacer. There is no other crew cab
box anywhere with a mounting depth that deep. There are a few knock-off
imitations out there but don't fall prey to their
gimmicks.
This box is a must-have if you like
your bass low and loud in your HD crew cab. With out a doubt, this is the
loudest best sounding style box you can put in your crew cab, making this box
our best selling box for this truck. Don't settle for anything less than a
quality crew cab box from Subthump. If some other imitation looks
'cheap', it probably is just that. Our box is the real deal. Get
yours today, they are going faster than ever!
|
Email Us: 
