|
-Fits 2010 & UP Camaro
Coupe with Boston Acoustics Factory Sound Systems
-Provides 4 channel RCA Pre-Amp Output Jacks to
your Factory Boston System
-Perfect for adding a sub to your existing 9 speaker factory Boston
Acoustic System
-Does NOT interfere with, replace, or alter the factory boston amp and
speaker system in any way shape or form
-Allows anyone to self-install their subwoofer system in their car
without taking it somewhere to be wired up
-Easy Plug and Play installation. Anyone can install this device
and is done completely from the trunk
-Saves time and eliminates the guesswork of search for the right wires in
the amp harness to tap into.
-Installs in seconds. Watch the video below
http://www.youtube.com/watch?v=WKWZjUnoZvw
-Note#1: This unit provices signal and remote turn on lead. It will
not "power your amp".
You still need to run power and ground cables
from your battery to your amplifier
-Note#2 Some Amplifiers may require
additional line conditioning such as a ground loop isolator, sold
separately
-We Highly recommend picking up our Audiopipe Groundloop Isolator
(NR16) in the related products below to go along with your harness. Plug
this device into the harness and plug your rca cables into it. The NR16
will eliminate the dc voltage in the line, which makes the signal much safer for
all amps and eliminates the turn off thump
Do you own a 2010 Camaro
and are wanting to install an aftermarket sub and sub amp? If you're
answer is yes, then we have the perfect product for you. We have developed
an extremely useful plug and play T-harness that will allow you to add RCA
outputs to your factory Boston Acoustics sound system. To install the
device, you simply unhook the lower connector on your factory amp (found in your
trunk) and plug our special output harness in-line. The harness is
designed to give you RCA outputs and a turn-on lead for sending signal and
switched power to your aftermarket amp. The simple plug and play feature
eliminates the hassle and guesswork of finding which wires to use for your
signal and turn-on wires. No more degrading your factory harness by
splicing or soldering into it. Don't waste hours trying to get signal
to your amp. If you want to cut hours
off your install time and make things easier on yourself, pick one of these up
today. Please note that this harness provides signal and switched
power only. We keep getting the misconception that this will 'run your new
amp'. It will not do so by itself. You will still need to provide
power and ground wires from your batter to your
amp.
What's new with Version
3.0
Version 2.0 was a great improvement of our initial V1.0
design. With version 3.0 we have simplified the wire colors greatly, which
makes working with the harness much easier, should it be necessary. V3.0
uses eia standard wiring colors. This way if you need to trim off the
rca's and hard wire your harness to your device, you can quickly and easily
decipher the wiring. A complete wiring key is below for your
convenience.
Wire
Color
Function
white w/ orange stripe
12v amp turn-on
purple
wires
right rear channel solid is+ blk stripe is-
green
wires
left rear channel solid is+ blk stripe is-
gray
wires
right front channel solid is+ blk stripe is-
white
wires
left front channel solid is+ blk stripe
is-
-------------------------------------------------------------------
|
Email Us: 
